General

Model M-01 is the "standard" module & fits most headsets.
Model M-02 is designed for the Peltor series 7000 headsets. Silicone gel earseal optional.
Model M-03 is designed to install into any military style helmet.
Model MX- module for minimal clearance applications (David Clark 13.X headsets).


Headsets

ADI: The M-01-A kit fits models 810.50.

Aircom: See Flightline.

Aircraft Spruce: See Skyline.

Altronics: The MX-01-A kit fits C-9060 and C-9064.

ASA: The M-01-A kit fits all models (HS-1).

Avcomm: The M-01-A fits all. Models AC-900, AC-800, & AC-454 need 5c x-over cable. Also, if the AMP cable is purchased, the push-to-talk feature cannot be retained.

Aviall/Avix: The M-01-A kit fits all models.

Communica: The M-02-A kit fits all models.

Comtronics: Models 3000, 5000 require M-01-A. Model 1000 requires M-02-A.

David Clark: The M-01-A fits all the H10-XX series. Models H10-13.4 and H10-13S require the MX-01-A kit. The H20-10 requires factory installation and longer installation time(no rush orders).

Dre: Models 1000, 2000, 4000 require factory installation.

Eastern Avionics: The M-01-A fits models Mil-2060.

Falcon: The M-01-A kit fits all models.

Flightcom: The M-01-A kit fits models 4DX & 4DLX. Model 5DX requires the MX-01-A kit. The Denali requires the M-02-A kit and factory installation. We do not fit the Eclipse!

Flightline: The M-01-A kit will fit model HS-60-B. Models HS-51 and HS-50-B require the M-02-A kit.

Gulf/Pacific Coast Avionics: The M-01-A kit fits models GCA-4T & GCA-6T. The GCA-8T requires the M-02-A kit.

*Lightspeed: The QFR series requires the M-02-A kit and factory installation.*

Lynx: The M-02-A fits the Micro-System headsets.

Marv Golden: The M-01-A will fit all except the MG-90.

Mendelssohn: See Pilot Avionics

Peltor: The M-02-A kit will fit the models 7002, 7003, 7004(7000Sport LE), 7005, & 7006. We do not fit any 8000 series or the 7000Pro GT.

Pilot Avionics: The M-01-A kit will fit the PA11-XX series headsets and the P-51, PA12.8S, & PA Cadet. Models PA11-90, PA31-70, & PA31-90 require the M-02-A kit. *PA21-60 requires a hardwired cable and factory installation.*

RST: The M-01-A kit fits all models.

Sennheiser: Model HME-100 requires the M-02-A kit and factory install.

Sigtronics: The M-01-A kit will fit models S-8, S-20, S-40, S-45, S-58, S-65, & S-68. Most are wired in series.

Skyline: The M-01-A kit will fit the Skycom H-40A & the Skypro H-80A.

Softcomm: The M-01-A kit fits all models. Models C-10 & C-60 need a 5c x-over cable. Also, if the AMP cable is purchased, the push-to-talk feature cannot be retained.

Telex: The M-01-A kit fits the Echelon 100, Pro-Air 2000, Pro-Air 3100, & Pro-Air 3500. The Pro-Air 2000 requires a $33.00 Telex gel earseal kit. (Telex P# 800027-001). Factory installation is required on all Telex headsets. We do not fit the EBM 1410 or the ANR4000!

Warren-Gregorie: We do not fit any of their headsets.

List last updated: 1-19-07


Helmets
The M-03-A will fit all SPH-3, 4, and 5, as well as HGU-33, HGU-55, HGU-84, PRK-37, HGU-56, and all military style helmets. Alpha helmets require M-02-A kit with our helmet gel-seals. All helmets must have earcups and earseals which are not included in the kit. NEW! Silicone gel earseals for helmets. Outstanding comfort!
Click here for helmet accessories.

If you have additional questions, or if your headset is not listed above, please call & inquire about your specific model.